Manual: WavesReverb Plugin

WavesReverb plugin window

The WavesReverb plugin is a simple reverb processor with few parameters, for adding depth and ambience to the signal while being easy to use.

Parameters

In Gain

• Controls the input level of the signal. It affects both the dry and wet signal, allowing you to reduce the volume of the final signal, in case it is too loud.
• Range: -96 dB to 0 dB

Reverb Mix

• Controls the level of the wet reverb signal. Lower, more negative values result in a more subtle reverb effect.
• Range: -96 dB to 0 dB

Reverb Time

• Sets the decay time of the reverb tail, determining how long the reverberated sound takes to fade away. Shorter reverb times simulate a smaller room, while longer reverb times create the impression of expansive, cathedral-like spaces.
• Range: 0ms to 3,000ms

HighFreqRTRatio

• The High Frequency Reverb Time Ratio is the ratio between high-frequency and low-frequency decay times in the reverb tail. A ratio of 1 means high frequencies decay at the same rate as low frequencies, creating a bright, artificial reverb. Lower ratios cause high frequencies to decay faster than low frequencies, resulting in warmer, more natural-sounding reverb.
• Range: 0 to 1